Angeliano

Sienoc 0 2mm Nozzle 3d Printer Extruder Print Head For

MroMax 4Pcs 3D Printer Nozzle,Stainless Steel Nozzle 0.4mm,M6 Thread Extruder Print Head for 1.75mm Filament V5-V6 3D Printer

Category : BISS
Brand : MroMax
Features
  • Precise Design--The 2mm/0.08inch Input 0.4mm/0.02inch extruder nozzles can prevent print head from leakage effectively and produce consistent prints with smooth and glossy polish. Reduce the resistance from the corners and avoid blocking of the filament with rounded chamfer.
  • Excellent Cleaning Needles---The nozzle cleaning needles are very flexible and robust, easy to bend the needle into nozzle and will not break. Perfect to handle tough extruder hot end nozzle clogs.
  • High material---the 3D printer nozzle are made of high quality Stainless Steel material, Against rust or erosion,sturdy and durable, connect with M6 out thread, easy to install.
  • Applicability and compatibility---Fit for External M6 thread connection, compatible with all V5 V6 1.75mm Filament 3D Printers.
  • Note---After replacing the nozzle, please recalibrate the distance between nozzle and build plate to ensure the quality of print parts.

    • 3D Printer Nozzle 0.4mm Brass Nozzle Extruder Print Head for 1.75mm Filament E3D V5-V6 3D Printer (20PCS)

    Category : BISS
    Brand : FEMBW
    Features
  • Parameter: input diameter 2.00mm; output diameter 0.4mm, out thread: M6, a set of 20 pcs printer nozzles and the outer surface is marked with a size, so you can easily identify the specifications of the nozzles.
  • Applicability and Compatibility: Our nozzles fit for Monoprice select mini, V5 V6, Prusa i3, Anet8, Anycubic i3 mega, etc, compatible with all E3D V5 V6 1.75mm PLA ABS 3D Printers. Fit exactly like the original.
  • Strict craftsmanship: FEMBW nozzle strictly follows making standard, Greatly extend its service life. The inner wall adopts arc structure reduce the pressure required to extrude the filament, Can quickly flatten the filament that achieving improve the stability of the entire nozzle and print quality.
  • Precise Design: Cutting with the diamond knife, make the contact surface more flat, so it can prevent printhead from leakage effectively and avoid nozzles clogging.
  • Cleaning Needles: FEMBW E3D 04 nozzle set contains 5 stainless steel cleaning needles, they are very flexible pliable and tough, perfect to handle tough extruder hot end nozzle clogs.

    • 3D Printer Nozzle 0.4mm Brass Nozzle Extruder Print Head for 1.75mm Filament E3D V5-V6 3D Printer (10PCS)

    Category : BISS
    Brand : FEMBW
    Features
  • Parameter: input diameter 2.00mm; output diameter 0.4mm, out thread: M6, a set of 10 pcs printer nozzles and the outer surface is marked with a size, so you can easily identify the specifications of the nozzles.
  • Applicability and Compatibility: Our nozzles fit for Monoprice select mini, V5 V6, Prusa i3, Anet8, Anycubic i3 mega, etc, compatible with all E3D V5 V6 1.75mm PLA ABS 3D Printers. Fit exactly like the original.
  • Strict craftsmanship: FEMBW nozzle strictly follows making standard, Greatly extend its service life. The inner wall adopts arc structure reduce the pressure required to extrude the filament, Can quickly flatten the filament that achieving improve the stability of the entire nozzle and print quality.
  • Precise Design: Cutting with the diamond knife, make the contact surface more flat, so it can prevent printhead from leakage effectively and avoid nozzles clogging.
  • Cleaning Needles: FEMBW E3D 04 nozzle set contains 5 stainless steel cleaning needles, they are very flexible pliable and tough, perfect to handle tough extruder hot end nozzle clogs.

    • 14 Pcs M6 3D Printer Nozzle 0.4mm Extruder Brass Nozzle Print Head for 1.75mm Filament E3D V5 V6 Makerbot

    Category : BISS
    Brand : Kulannder
    Features
  • Good Design: The hole of 3D print nozzle is consistent size and machining, the threads is clean and well formed. The size is clear stamped on the nozzles.
  • Compatibility: Compatible with all 1.75mm ABS/ PLA 3D printer, work well with Monoprice select mini, V5 V6, Prusa i3, Anet8, Anycubic i3 mega, etc.
  • Replacement Nozzle: The 0.4mm M6 3D printer nozzle is a good back up or emergenices when the stock nozzle clog, our brass nozzles produce consistent printing and no clog, give you a smooth and clean printing.
  • Brass Material: The extruder brass nozzle print head is made of durable and solid brass material, not easy get rust or erosion, provide long serivice life.
  • Quantity: Package include 14pcs nozzle print head, out diameter: 0.4mm.

    • MroMax 0.4mm 3D Printer Nozzle Head M6 Thread Replacement for V5 V6 3mm Filament Extruder Print, Brass Nozzle 4Pcs

    Category : BISS
    Brand : MroMax
    Features
  • [Size]: Screw Thread: M6; Nozzle Diameter: 0.4mm/0.02inch; Input Diameter: 3.2mm/0.13inch; Total Dimension: 12.5x7mm / 0.5x0.28 inch (L*D).
  • [Compatibility]: Compatible with 3mm Filament V5 V6 3D printers.
  • [Brass Material]: Not easy to get rust or erosion, provides long service life.
  • [Smooth Surface]: Smooth contact surface can be well connected with other head of hot end to avoid leakage, get a smooth and clean printing.
  • [Application]: Suitable for most non-abrasive materials such as PLA, ABS, PETG, Nylon, TPE, TPU, PC etc.

    • 25pcs 3D Printer Nozzle Brass, 0.4mm Brass Nozzle Extruder Print Head, for 1.75mm Filament E3D V5-V6 3D Printer （Bring a mounting Wrench）

    Category : BISS
    Brand : Taasmoog
    Features
  • 【Package Contains】: 25 pcs 0.4mm M6 3D printer nozzles, 1 pcs spanners.
  • 【Applicability and Compatibility】: Our nozzles fit for Monoprice select mini, V5 V6, Prusa i3, Anet8, Anycubic i3 mega, etc, compatible with all E3D V5 V6 1.75mm PLA ABS 3D Printers. Fit exactly like the original.
  • 【Easy to Install】:The extrusion holes are centered and concentric, the bore is smooth, and the threads are clean, connect with M6 out the thread, easy to install.
  • 【Precise Design】: Cutting with the diamond knife, make the contact surface more flat, so it can prevent printhead from leakage effectively and avoid nozzles clogging.
  • 【100% Guarantee】Each 3D printer nozzle brass of the we team has unparalleled quality and reliable customer service. If you have any questions, please feel free to contact us. We take a good shopping experience for customers as our ultimate goa.

    • MroMax 0.4mm 3D Printer Nozzle Head M7 Thread Replacement for MK10 1.75mm Filament Extruder Print, Brass Nozzle 4Pcs

    Category : BISS
    Brand : MroMax
    Features
  • [Size]: Screw Thread: M7; Nozzle Diameter: 0.4mm/0.02inch; Input Diameter: 2mm/0.08inch; Total Dimension: 13 x 9mm/0.51 x 0.35inch(L*D).
  • [Compatibility]: Compatible with 1.75mm/0.07inch Filament MK10 3D printers.
  • [Brass Material]: Not easy to get rust or erosion, provides long service life.
  • [Smooth Surface]: Smooth contact surface can be well connected with other head of hot end to avoid leakage, get a smooth and clean printing.
  • [Application]: Suitable for most non-abrasive materials such as PLA, ABS, PETG, Nylon, TPE, TPU, PC etc.

    • BigcaseTech 24 PCS Nozzles for E3D V5-V6 Extruder, M6 Brass Extruder Print Head Hotend(0.2mm,0.4mm,0.6mm,0.8mm,1.0mm) with 3D Printer Nozzle Cleaning Kit 36 Pack (for E3D V5-V6 Nozzles)

    Category : BISS
    Brand : BigcaseTech
    Features
  • Package include: 24 pieces M6 3D Printer nozzles in total, 2pcs x 0.2mm, 2pcs x 0.6mm, 2pcs x 0.8mm, 2pcs x 1.0mm, 16pcs x 0.4mm
  • Diameter: input diameter: 1.75mm; output diameter: 0.2mm, 0.4mm, 0.6mm, 0.8mm, 1.0mm
  • Compatibility: compatible with E3D V5-V6 M6 extruder 3D printer.
  • Comes with 5pcs 0.4mm cleaning needles, 4 pcs hex wrenches , 3 pcs Spanners, all the 3d printer accessories kits are collecting in a tube container
  • Installation: external M6 thread connection

    • 25Pcs 3D Printer Nozzle Kit MK8 Extruder Nozzles Brass Print Head 0.2mm, 0.3mm, 0.4mm, 0.5mm, 0.6mm, 0.8mm, 1.0mm with Storage Box Compatible with 3D Printer Makerbot Creality CR-10 Ender 3 5

    Category : Home Improvement
    Brand : Fgithk
    Features
  • Package include--20 pieces MK8 nozzles(0.2mm×2,0.3mm×2,0.4mm×8,.0.5mm×2,0.6mm×2.0.8mm×2,1.0mm×2), 5 pieces 3D printer nozzle cleaning needles, the whole set can meet your various needs
  • Premium Materials--MK8 nozzles are made of high quality brass material.Heavy duty and provide a long service life.Easy to install and change.
  • Applicability and Compatibility--MK8 extruder nozzles fit for 3D Printer Makerbot Creality CR-10,Ender 3 5,MK8 Makerbot Reprap Prusa I3, compatible with all 1.75mm PLA ABS 3D printer.
  • Precise Design--MK8 Nozzle through long-term testing to solve the problem of plugging and missing materials to the greatest extent, low thermal conductivity, resistant to corrosion, high abrasion resistance.
  • Parameter--Input diameter 1.75mm; output diameter 0.2mm,0.3mm,0.4mm,.0.5mm,0.6mm.0.8mm,1.0mm ; Screw thread: M6;Hexagon diameter: 6mm

    • 16 PCS 3D Printer Brass Extruder Nozzle Print Head with 4 DIY Nozzle Tools, DuKuan 7 Different Sizes Nozzles & Screw Driver, Spanner, Wrench Sleeve and Cleaning Needles Compatible with MK8

    Category : BISS
    Brand : DaKuan
    Features
  • GOOD VALUE PACKAGE- 2x 0.2mm Printer Extruder Nozzle, 2x 0.3mm Printer Extruder Nozzle, 4x 0.4mm Printer Extruder Nozzle, 2x 0.5mm Printer Extruder Nozzle, 2x 0.6mm Printer Extruder Nozzle, 2x 0.8mm
  • COMPATIBILITY- This printer nozzles are compatible with Anet A8, Creality CR-10, Tevo Tarantula, MK8 Makerbot, Duplicator, Prusa i3 and Reprap Printer.
  • PREMIUM QUALITY- These printer nozzle are made of brass. The cleaning needles are made of high quality stainless steel, flexible, sturdy and durable. With a handle, you can twist the drill when using.
  • SIZE- Nozzle dimension: Out Thread: M6, Filament Diameter: 1.75mm, Output Diameter: 0.2mm, 0.3mm, 0.4mm, 0.5mm, 0.6mm, 0.8mm, 1.0mm. There are 5 different size cleaning needles : 0.2 mm, 0.3 mm, 0.4mm,
  • EASY TO USE- The package includes full equipped tools for assembling 3D printer, as well as cleaning tools.

    • All Metal MK8 Extruder, MYSWEETY 3D Printer Extruders Hotend Kit with 0.2/0.3/0.4/0.5mm Nozzle Print Head for MakerBot Prusa i3 Reprap 3D Printer 1.75mm Filament Supported

    Category : BISS
    Brand : MYSWEETY
    Features
  • Assembled mk8 extruder come with 4 print nozzles; Diameter: 0.4mm defaulted; 0.2mm, 0.3mm, 0.5mm optional.
  • It is compatible with most prusa i3 3d printers with some slight modifications when mounting it.
  • Filament size: 1.75mm PLA/ABS or other 3d print materials. Flow rate of nozzle:max 100mm/s, support for high speed printing.
  • Nema 17 high quality stepper motor with larger torque and less heat buildup.
  • Special ceramic insulation cotton ensure the hotend can heat to a high temperature fast and stably.

    • 30 Pieces 0.4mm MK8 Extruder Nozzle - Wellerly M6 MK8 3D Printer Nozzles Brass Print Head with Free Storage Box for 3D Printer Makerbot Anet A8 Creality CR-10 CR-10S S4 S5 Ender-3 5

    Category : BISS
    Brand : Wellerly
    Features
  • Package Include: 30 pcs 0.4mm MK8 Extruder 3D Printer nozzles in total.
  • Parameter: input diameter 1.75mm; output diameter 0.4mm; out thread: M6
  • Fit for: 3D Printer MK8 Makerbot Anet A6 Anet A8, Creality CR-10 CR-10mini CR-10S S4 S5, Tevo tornado, MK8 Makerbot Reprap Prusa I3, Ender 2, Ender 3 and Ender 5. Compatible with all 1.75mm PLA ABS 3D printer.
  • Premium Brass Material & Easy to Install: 3D printer nozzles are made of high quality brass material, sturdy and durable.
  • * Easy to Install: It can be easy connect with M6 out thread. NOTE: Small accessories, please keep away from children.

    • uxcell 0.8mm 3D Printer Nozzle Head M6 Thread Replacement for V5 V6 3mm Extruder Print, Stainless Steel 4pcs

    Category : BISS
    Brand : uxcell
    Features
  • [Size]: Thread: M6; Nozzle Diameter: 0.8mm; Input Diameter: 3.2mm; Total Dimension: 12.5x7mm / 0.5"x0.28" (L*D)
  • [Compatibility]: Compatible with 3mm Filament V5 V6 3D printers.
  • [Stainless Steel Material]: Not easy to get rust or erosion wear resistant, provides long service life.
  • [Smooth Surface]: Smooth contact surface can be well connected with other head of hot end to avoid exudation, get a smooth and clean printing.
  • [Application]: Suitable for most non-abrasive materials such as PLA, ABS, Nylon, TPE, TPU, PC etc.

    • uxcell 0.4mm 3D Printer Nozzle Head M6 Thread Replacement for MK8 1.75mm Extruder Print, Brass 4pcs

    Category : BISS
    Brand : uxcell
    Features
  • [Size]: Thread: M6; Nozzle Diameter: 0.4mm; Input Diameter: 2mm; Total Dimension: 13x8mm / 0.51"x0.31" (L*D)
  • [Compatibility]: Compatible with 1.75mm Filament MK8 3D printers.
  • [Brass Material]: Not easy to get rust or erosion, provides long service life.
  • [Smooth Surface]: Smooth contact surface can be well connected with other head of hot end to avoid exudation, get a smooth and clean printing.
  • [Application]: Suitable for most non-abrasive materials such as PLA, ABS, Nylon, TPE, TPU, PC etc.

    • E3D Nozzles, ExcelFu M6 0.4mm Brass Nozzle Extruder Print Head for 1.75mm Filament E3D V5-V6 3D Printer, Pack of 20

    Category : BISS
    Brand : EXCELFU
    Features
  • Material: brass
  • Installation: external M6 thread connection
  • Diameter: input: 1.75mm, output: 0.4mm
  • Compatible: all 1.75mm PLA abs printer
  • Quantity: 20 pcs 0.4mm M6 3D Printer nozzles

    • uxcell 0.6mm 3D Printer Nozzle Head M6 Thread Replacement for MK8 1.75mm Extruder Print, Brass 10pcs

    Category : BISS
    Brand : uxcell
    Features
  • [Size]: Thread: M6; Nozzle Diameter: 0.6mm; Input Diameter: 2mm; Total Dimension: 13x6mm / 0.51"x0.24" (L*D)
  • [Compatibility]: Compatible with 1.75mm Filament MK8 3D printers.
  • [Brass Material]: Not easy to get rust or erosion, provides long service life.
  • [Smooth Surface]: Smooth contact surface can be well connected with other head of hot end to avoid exudation, get a smooth and clean printing.
  • [Application]: Suitable for most non-abrasive materials such as PLA, ABS, Nylon, TPE, TPU, PC etc.

    • Rustark 30pcs 3D Printer Nozzle kit Brass J-Head Extruder Print Heads 0.2mm 0.3mm 0.4mm 0.5mm 0.6mm 0.8mm 1mm Tools with 2 Pack Spanner for V5 V6 Nozzles Replacement Removal

    Category : BISS
    Brand : Rustark
    Features
  • √【MULTIPLE SIZE】The set contains 7 sizes of J-Head extruder nozzle, including: 0.2mm 0.3mm 0.4mm 0.5mm 0.6mm 0.8mm 1mm. The set is not only suitable for M6 thread, but also for MK8 MK7 UM2 CR10 etc. One convenient set could meet your various needs. Welcome to purchase.
  • √【EXQUISITE CRAFTSMANSHIP】 3D Printer Extruder Nozzle is made of high-quality brass with Smooth Surface, Hardness, High Precision and Thermal Conductivity. The Clear Letters on the surface make it easy to distinguish sizes so that you could choose the suitable one effectively. More importantly, the silk output from the extruder nozzle is uniform, because there is no burr in the smooth interior. J-Head design could reduce material, increase the filament forming speed and avoid blocking.
  • √【INSTALLATION TOOL】Come with 2 different sizes of spanner, 17 mm and 21mm. The spanner is a good helper, made of top-quality mental, sturdy and durable, wear Resistance. It is more convenient and easier for you to replace or install the 3D Printer Extruder Nozzle.
  • √【PACKAGE INCLUDE】28 piece 3D Printer Extruder Nozzle in total,3pcs x 0.2mm, 3pcs x 0.3mm, 10pcs x 0.4mm, 3pcs x 0.5mm, 3pcs x 0.6mm, 3pcs x 0.8mm, 3pcs x 1.0mm. 2 piece open end spanner totally,1pcsx17mm, 1pcsx21mm.
  • √【RELIABLE AFTER-SALE SERVICE】We offer you reliable after-sales service. If you have any questions about our products or any problems with your packages, please feel free to contact us. We will reply you within 12 hours and we will try our best to solve the problems until you are satisfied.

    • Kee Pang All-Metal J-Head V6 Hotend Kit with 5 Pcs Extruder Print Head and Nozzle Throat + Volcano Heating Block+ 4 Pcs Volcano Extruder Nozzles for 3D Printers

    Category : BISS
    Brand : Kee pang
    Features
  • 100% SATISFACTION GUARANTEE: Refund your money in 30 days.Any accessory appears to be unable to work, please contact us and get free replacement
  • High temperature & heat ventilation: 12V/40W NTC heater, avoid NTC burn and break frequently, 304 stainless steel material nozzle throat and high quality resistance whose temperature can up to 280 °C, 12V high speed fan, lose heat quickly
  • Anti-leakage & anti-blocking design: nozzle and tube connect seamless, prevent material leaking and blocking
  • Easy to install: NTC connector with terminal, you can install directly
  • Compatible with all 1.75mm E3D V6 Makerbot 3D printer; NTC connector with terminal, easy to intall

    • All-Metal J-Head V6 Hotend Kit with 5Pcs Extruder Print Head and 2PCS Nozzle Throat + Volcano Heating Block+ 4 Pcs Volcano Extruder Nozzles and a Silicone Cover for 3D Printers

    Category : BISS
    Brand : Xinmeng
    Features
  • Applicability & compatibility: compatible with all 1.75mm E3D V6 Makerbot 3D printer; NTC connector with terminal, easy to intall
  • High temperature & heat ventilation: 12V/40W NTC heater, avoid NTC burn and break frequently, 304 stainless steel material nozzle throat and high quality resistance whose temperature can up to 280 °C, 12V high speed fan, lose heat quickly
  • Anti-leakage & anti-blocking design: nozzle and tube connect seamless, prevent material leaking and blocking
  • Easy to install: NTC connector with terminal, you can install directly
  • Specification: brass material extruder nozzles, output diameter 0.3mm/ 0.4mm/ 0.5mm, input diameter (filament) 1.75mm

    • BigcaseTech 24PCS 3D Printer Nozzles for E3D V5-V6 Extruder, M6 Thread Brass Extruder Print Head Hotend(0.2mm,0.4mm,0.6mm,0.8mm,1.0mm) (24 Pack)

    Category : BISS
    Brand : BigcaseTech
    Features
  • Package include: 24 pieces M6 3D Printer nozzles in total, 2pcs x 0.2mm, 2pcs x 0.6mm, 2pcs x 0.8mm, 2pcs x 1.0mm, 16pcs x 0.4mm
  • Diameter: input diameter: 1.75mm; output diameter: 0.2mm, 0.4mm, 0.6mm, 0.8mm, 1.0mm
  • Compatibility: compatible with E3D V5-V6 M6 extruder 3D printer.
  • Installation: external M6 thread connection
  • Service：One-month free trial, 30 day Money-back if you’re not satisfied. If you aren’t happy with our 3D printer nozzles, tell us and we will arrange a refund for you.

    • Onyehn 22pcs/Lots A8&A2 3D Printer Part Each 5PCS 0.4mm Extruder Nozzle Print Head+1.75mm Teflon Throat Tube+Heater Blocks Hotend for MK8 Makerbot Reprap

    Category : BISS
    Brand : Onyehn
    Features
  • Pack of 5 x 3D Printer Extruder Hotend 30mm Length 1.75mm Nozzle Inputting Tube( for MK8 Makerbot Reprap Prusa I3 3D Printer) and 5 x 3D Printer 0.4mm Extruder Brass Nozzle Print Head. Gift 5pcs M6 nuts and 2 hex wrenches
  • 0.4mm Extruder Brass Nozzle Print Head: Color - Golden; Material - copper (brass); Size - 5*13mm; Input Diameter: 1.75mm; Output Diameter: 0.4mm.
  • Nozzle Throat: Outer Thread - M6; Inner Diameter - 2mm; Length - 30mm; Filament Diameter - 1.75mm; Material - Stainless Steel.
  • Compatibility: compatible with all 1.75mm PLA ABS 3D Printer
  • Quantity:22pcs/lot (5x 3D Printer Nozzle Throat Tube 5x Nozzle Print Heads 5x Heater Blocks Hotend 5x M6 nuts 2x Hex Key Wrenches (for MK8 Makerbot Reprap Prusa I3 3D Printer))

    • Anet A2 / A8 3D Printer Part, 5PC 0.4mm Brass Extruder Nozzle Print Head+ 5PC 30mm Length Teflon Throat Tube+ 5PC Heater Blocks Hotend for Anet A8 3D Printe

    Category : BISS
    Brand : Anet
    Features
  • Nozzle Throat: Outer Thread - M6; Inner Diameter - 2mm; Length - 40mm; Filament Diameter - 1.75mm; Material - Stainless Steel.
  • 0.4mm Extruder Brass Nozzle Print Head: Color - Golden; Material - copper (brass); Size - 5*13mm; Input Diameter: 1.75mm; Output Diameter: 0.4mm.
  • HeatinCompatibility: compatible with all 1.75mm PLA ABS 3D printerg block size£º20*20*10MM
  • Package Including:5 piece x 30mm Tube,5 piece x 0.4mm Nozzle ,5 piece x Heater Blocks Hotend

    • MK8 Hot End Extruder Nozzle Kit 0.4mm for 3D Printer,Assembled Extruder Brass Kits 1.75mm,30mm A8 Throat Tubing Aluminum Heater Block for RapRep i3 Anet A2 A8 3D Printer Part Replacement

    Category : BISS
    Brand : DORHEA
    Features
  • Heated Tubing :12V/40W high temperature resistance heater (wire length 1M/39.4inches), operating temperature range:0~+280°C (0~+538°F)
  • Nozzle: 0.4mm Extruder Brass Nozzle Print Head, Compatible with 1.75mm PLA ABS 3D printer
  • 30mm Length Extruder 1.75mm Tube, made from stainless steel ,compatible with 1.75mm PLA ABS 3D printer, reduces extrusion force and improve reliability of retractions thanks to the improved internal surface finish
  • Heater block: Aluminium Material heater block, 2cm X 2cm X 1cm, comes with a necessary M6d screw. Working perfectly with ABS and PLA filaments
  • You can repair your extruder with this kit instead of replacing a new one when your extruder suffers a clog that can't be fixed. A great replacement hot end for MK8, i3, E3D, Anet A8, Alunar M508, CR7, V2 etc

    • AFUNTA 6 Sets/18 Pcs 3D Printer 0.4mm MK8 Stainless Steel Extruder Nozzle Print M6 Head & 1.75mm 30mm Length Teflon Throat Tube & Heater Blocks Hotend, Compatible MK8 Makerbot Reprap i3 / Anet A8 A2

    Category : BISS
    Brand : AFUNTA
    Features
  • COMPATIBILITY: Compatible with all 1.75mm PLA ABS 3D printer.
  • 0.4MM EXTRUDER NOZZLE PRINT HEAD: Material---Stainless steel; Input Diameter---1.75mm; Output Diameter---0.4mm, Out Thread: M6.
  • 30MM LENGTH EXTRUDER TUBE: External Thread Diameter---6mm, Inner Diameter---2mm, Length---30mm (Suitable for Anet A8/A2 3D Printer); Filament Diameter---1.75mm; Material - Stainless Steel.
  • HEATER BLOCKS HOTEND: Thermocouple Mounting Hole---M3, Nozzle & Nozzle Throat Hole---M6, Hole for Mounting Screw---M3.
  • NOZZLE CLEANING NEEDLES: 0.4mm, stainless steel, suitable for cleaning your 3D Printer nozzles.

    • 20PCS 0.4mm MK8 3D Printer Extruder Nozzles for Makerbot Ender 3 3Pro CR-10, Extruder Nozzles with 12 PCS 3D Printer Nozzle Cleaning Tool Kit (32Pieces Set)

    Category : BISS
    Brand : LYOUCI
    Features
  • Premium Materials--MK8 nozzles are made of high quality brass material.Heavy duty and provide a long service life.Easy to install and change.
  • Applicability and Compatibility--MK8 extruder nozzles fit for 3D Printer Makerbot Creality CR-10, MK8 Makerbot Reprap Prusa I3, compatible with all 1.75mm PLA ABS 3D printer.
  • Precise Design--MK8 Nozzle through long-term testing to solve the problem of plugging and missing materials to the greatest extent, low thermal conductivity, resistant to corrosion, high abrasion resistance.
  • Package include--20 pieces 0.4mm MK8 nozzles, 10 pieces 3D printer nozzle cleaning needles,1piece antistatic tweezers and 1 piece wrench, the whole set can meet your various needs
  • Parameter--Input diameter 1.75mm; output diameter 0.4mm ; Screw thread: M6;Hexagon diameter: 6mm

    • Haobase Assembled Extruder Part Hot End for 3D Printer 1.75mm Filament Direct Feed 12V Extruder 0.4mm Nozzle

    Category : BISS
    Brand : Haobase
    Features
  • Application : For 3D Printer (Extruder)
  • Material : Stainless Steel, Brass,aluminum
  • Brass nozzle size:13mm*6mm
  • Tube Inner Diameter : 2mm And Length : 26mm

    • KEHUASHINA 3D Printer Hotend Extruder 3 in 1 Out Multi Color Extruder kit Diamond V6 1.75mm / 0.4mm Nozzle 12V 40W Heater

    Category : BISS
    Brand : KEHUASHINA
    Features
  • Usage: 3 in 1 out diamond hotend support 3 filaments of different colors and different material. with this hotend, you can creating printings with a wide range of colors and materials in a single object, in one print.
  • Easy to level nozzles make getting started in multi-extrusion easier than ever before.
  • Mini Size: It is very light and it will not weigh down your printer or reduce printing performance.
  • High performance E3D style heatsinks with efficient heat dissipation for fantastic printing.
  • 100% Satifaction Guarantee: Comes with 100% no-hassle satisfaction guarantee. We are confidence with the quality of our products. Please feel free to contact us, we are glad to hear from you.

    • Wangdd22 3D Printer J-Head Hotend with Fan for 1.75mm 12v V6 Direct Filament Wade Extruder 0.4mm Nozzle+Volcano kit

    Category : BISS
    Brand : Wangdd22
    Features
  • Applicability & compatibility: compatible with all 1.75mm E3D V6 Makerbot 3D printer; NTC connector with terminal, easy to intall
  • Anti-leakage & anti-blocking design: extruder nozzle connect connect with the tube seamless, prevent print material from leaking or blocking
  • Heat resistant & ventilation: 12V/40W NTC heater, avoid NTC burn and break frequently, 304 stainless steel material nozzle throat and high quality resistor whose temperature can up to 280°C, 12V high speed fan, radiating quickly
  • Specification: brass material extruder nozzles, output diameter 0.3mm/ 0.4mm/ 0.5mm, input diameter (filament) 1.75mm
  • Package include: all metal V6 hotend 12v/40w/1.75mm/0.4mm extruder full kit(V6 print head + fan + fan cover + PTFE tube + tube fitting ), 3 pcs brass extruder nozzles(1x0.3mm/1x0.4mm/1x0.5mm), 4 pcs brass volcano extruder print head(1x0.6/1x0.8/1x1.0/1x1.2) and a volcano heating block, 2Pcs teflon tube within 1.75mm stainless steel nozzle throat

    • Printing Print Head Printhead for HP-Officejet Pro 8710 8720 8730 7720 7740 952 953 954 955 Replacement Print Head,Parts Professional Accessory Print Head Spray Nozzle Table Printer

    Category : Office Product
    Brand : KFSO
    Features
  • PERFORMANCE: Stable characteristics, high reliability.
  • 【High Performance】Stable characteristics, high reliability.
  • 【Easy installation】Be careful when installing the nozzle, be sure to power off first and put it in place.
  • 【Fitment】Compatible For HP 8710 8720 8730 7720 7740 952 953 954 955
  • 【Recommend】It is recommended to use quality photo ink, which can extend the usage life of the piezoelectric nozzle.

    • Anet MK8 Extruder Kit for Anet A6 3D Printer, Hot End Extruder Set Including - Extruder Motor, Cartridge Heater, Thermistor, Throat Tube, Heater Block, 0.4mm Nozzle, Cooling Fan and Heat Sink

    Category : BISS
    Brand : Anet
    Features
  • Extruder kit for Anet A6 3D printer;
  • Cartridge Heater cable: 0.5m;
  • Stepper motor model: SL42STH40-1684A;
  • Cooling fan operating voltage:12V;
  • The working voltage 12V, 24V, default 12V;