Angeliano

Aideepen Esp32 Cam Wifi Bluetooth Board Esp32 Cam Mb Micro

Aideepen ESP32-CAM WiFi Bluetooth Board ESP32-CAM-MB Micro USB to Serial Port CH340G with OV2640 2MP Camera Module Dual Mode for Arduino

Category : Personal Computer
Brand : Aideepen
Features
  • The HK-ESP32-CAM-MB module is a small camera module ,it can work independently as the smallest system
  • HK-ESP32-CAM-MB adopts Micro USB interface, convenient and reliable connection method, convenient to apply to various IoT hardware terminal occasions
  • A new WiFi+Bluetooth dual-mode development board based on ESP32 design, using PCB on-board antenna, with 2 high-performance 32-bit LX6CPU, using 7-level pipeline architecture, main frequency adjustment range 80MHz to 240Mhz
  • Ultra-low power consumption, deep sleep current is as low as 6mA. It is an ultra-small 802.11b/g/n Wi-Fi + BT/BLE SoC module
  • Supporting interfaces such as UART/SPI/I2C/PWM/ADC/DAC
  • 2 PCS ESP32-CAM WiFi Bluetooth Development Board, Aideepen 2PCS ESP32 DC 5V Dual-core Wireless with OV2640 Camera TF Card Module

    Category : Personal Computer
    Brand : Aideepen
    Features
  • ✅【ESP32-CAM】 It is DIP packed and can be plugged directly into the breadboard for quick use. Working Voltage: DC 5V Product Size: 27mm x 40mm x 4.5mm (without pins)
  • ✅Support UART/Serial Peripheral Interface/I2C/PWM/ADC/DAC and other interfaces; Support OV2640 and OV7670 cameras with built-in flash.
  • ✅ ESP32 integrated antenna switch, RF balun amplifier, low noise amplifier, filter, power management module and other functions in one.
  • ✅ESP32 requires very few peripherals for high-performance processing performance, reliable security and Wi-Fi and Bluetooth features.
  • ✅ ESP32CAM Camera Development Board is small and can be widely used in various IoT applications. It is suitable for home smart devices, industrial wireless control, wireless monitoring, QR identification, wireless positioning system signals and other IoT applications. It is an IoT application.
  • ICQUANZX ESP32-CAM WiFi Bluetooth Board ESP32-CAM-MB Micro USB to Serial Port CH340G with OV2640 2MP Camera Module Dual Mode Compatible with Arduino

    Category : BISS
    Brand : ICQUANZX
    Features
  • it is new WiFi+Bluetooth dual-mode development board based on ESP32 design, using PCB on-board antenna, with 2 high-performance 32-bit LX6CPU, using 7-level pipeline architecture, main frequency adjustment range 80MHz to 240Mhz
  • ESP32-CAM WiFi Bluetooth Board ESP32-CAM-MB Micro USB to Serial Port CH340G with OV2640 2MP Camera Module
  • HK-ESP32-CAM-MB adopts Micro USB interface, convenient and reliable connection method, convenient to apply to various IoT hardware terminal occasions.
  • Ultra-low power consumption, deep sleep current is as low as 6mA. It is an ultra-small 802.11b/g/n Wi-Fi + BT/BLE SoC module
  • Application: Home smart device image transmission; Wireless monitoring ;Smart agriculture ;QR wireless recognition; Wireless positioning system signal and so on.
  • MakerFocus ESP32 Development Board Upgraded Version 8MB Flash, ESP32 WiFi Bluetooth, ESP32 OLED 0.96 Inch OLED Display CP2102 Internet for Ar duino ESP8266 NodeMCU

    Category : Personal Computer
    Brand : MakerFocus
    Features
  • [Full documentation]: https://drive.google.com/file/d/1_P9HP9dKquaM_gGJa4mBdF9D2Kwx_v6s/view?usp=sharing; [Note]: This ESP32 development board comes unassembled, soldering of headers is required!!★ It can lithium battery powered, the lithium battery is not included, battery may be purchased here: https://www.amazon.com/dp/B07CXNQ3ZR
  • ★Add battery power detection circuit. Use ADC2_4 (GPIO 13) to read battery voltage, Please get the example link from the product description below
  • [This is an upgraded version WiFi Kit 32! ] What's the Upgrade of New WiFi Kit 32? 1. 4MB (32M-bits) FLASH upgrade to 8MB (64M-bits) FLASH; 2. Better 2.4GHz antenna design and impendence matching; 3. Basic low power design (800uA in deep sleep); 4. Add battery power detection circuit. Use ADC2_4 (GPIO 13) to read battery voltage. Please get the example link from the product description below
  • 5. Add Vext power output pin, users can use this pin to drive some external device (sensor, motor etc.), when system need into deep sleep mode, Vext can be turn off. This pin was controlled by GPIO21, for example: Turn ON: digitalWrite(21, LOW); Turn OFF: digitalWrite(21, HIGH)
  • 6. New WiFi Kit 32 pinout diagram; 7. New WiFi Kit 32 schematic diagram; 8. Circuit optimization, system more stable; 9. Better power manage system design
  • MakerFocus ESP32 Development Board Upgraded Version 8MB Flash, ESP32 WiFi Bluetooth, ESP32 OLED 0.96 Inch OLED Display & 4pcs 3.7V Lithium Rechargable Battery JST1.25 Connector 2pin

    Category : Personal Computer
    Brand : MakerFocus
    Features
  • [This is an upgraded version WiFi Kit 32! ] What's the Upgrade of New WiFi Kit 32? 1. 4MB (32M-bits) FLASH upgrade to 8MB (64M-bits) FLASH; 2. Better 2.4GHz antenna design and impendence matching; 3. Basic low power design (800uA in deep sleep); 4. Add battery power detection circuit. Use ADC2_4 (GPIO 13) to read battery voltage. Please get the example link from the product description below
  • 5. Add Vext power output pin, users can use this pin to drive some external device (sensor, motor etc.), when system need into deep sleep mode, Vext can be turn off. This pin was controlled by GPIO21, for example: Turn ON: digitalWrite(21, LOW); Turn OFF: digitalWrite(21, HIGH)
  • 6. New WiFi Kit 32 pinout diagram; 7. New WiFi Kit 32 schematic diagram; 8. Circuit optimization, system more stable; 9. Better power manage system design
  • After some customers reflected the reversed connectors, we have modified the connectors now, so all the new batteries are correct correct polarity now, you don't need to switch the polarity of the two wires. Thanks a ton for every customer's suggestion and support.
  • This product interface is JST1.25 pitch male, it can be matched with some ESP32 Development Board that it come with Female JST 1.25 mm connectors, The maximum operating current of this battery is only about 1A, cannot be used for unmanned aerial vehicles, model aircraft or power tools and other products that require high current.
  • 3 Pieces ESP32-CAM WiFi Board ESP32-CAM-MB Micro USB to Serial Port CH340G with OV2640 2MP Camera Module Development Board Compatible with Arduino IDE Arduino Raspberry Pi

    Category : Personal Computer
    Brand : Frienda
    Features
  • Proper size: the ESP32-CAM has a competitive small-size camera module that can operate independently as a mini system, measuring only 27 x 40.5 x 4.5mm, with deep sleep current and as low as 6mA
  • Reliable connection method: ESP-32CAM is packaged in DIP and can be directly plugged into the backplane for quick production; It provides customers with a reliable connection method and is convenient for use in various IoT hardware terminals
  • Low power consumption: deep sleep current is as low as 6mA; It is a small 802.11b/g/n Wi-Fi + BT/BLE SoC module
  • Wide range of use: ESP-32CAM can be widely applied in various IoT applications; It is suitable for home smart devices, industrial wireless control, wireless monitoring, QR wireless, wireless positioning system signals and other IoT applications; It is an proper solution for IoT applications
  • Strong compatibility: compliant with WiFi 802.11b/g/n/e/i and 4.2 standards, it can be applied as a master mode to build an independent network controller, or as a slave to other host MCUs to add networking capabilities to existing devices
  • ACEIRMC ESP32-CAM WiFi + Bluetooth Module WiFi ESP32 CAM Development Board with Camera Module OV2640 2MP + FT232RL FTDI USB to TTL Serial Converter + 20 pin Jumper Wire

    Category : Personal Computer
    Brand : ACEIRMC
    Features
  • ESP32-CAM WiFi + Bluetooth Module WiFi ESP32 CAM Development Board with Camera Module OV2640 2MPcompatible for Arduino, Support Image WiFi Upload and TF Card
  • Bluetooth: Bluetooth 4.2 BR/EDR and BLE standard; Wi-Fi: 802.11 b/g/n/e/i; Support Interface: UART, SPI, I2C, PWM; Support TF Card: Maximum support 4G
  • Camera WiFi + Bluetooth Module 4M PSRAM Dual-core 32-bit CPU Development Board with OV2640 2MP Camera Module + FT232RL FTDI USB to TTL Serial Converter + 20 pin Jumper Wire
  • FTDI USB Serial Adapter comes with the FT232RL chip and uses both 3.3V and 5V operating voltage. Adapter Logic-level can be set via jumpers on the board, which makes simple to connect to your controller. USB power has over current protection, using 500MA self-restore fuse.
  • This module supports interfaces such as UART / SPI / I2C / PWM / ADC / DAC; Supports OV2640 and OV7670 cameras.
  • Frienda 2 Pieces ESP32-CAM WiFi Board ESP32-CAM-MB Micro USB to Serial Port CH340G with OV2640 2MP Camera Module Compatible with Arduino IDE Arduino Raspberry Pi

    Category : Personal Computer
    Brand : Frienda
    Features
  • Small-size: the ESP32-CAM has a competitive small-size camera module that can operate independently as a mini system, measuring only 27 x 40.5 x 4.5mm, with deep sleep current and as low as 6mA
  • Reliable connection method: ESP-32CAM is packaged in DIP and can be directly plugged into the backplane for quick production; It provides customers with a reliable connection method and is convenient for use in various IoT hardware terminals.
  • Low power consumption: deep sleep current is as low as 6mA; It is a small 802.11b/g/n Wi-Fi + BT/BLE SoC module
  • Strong compatibility: compliant with WiFi 802.11b/g/n/e/i and 4.2 standards, it can be applied as a master mode to build an independent network controller, or as a slave to other host MCUs to add networking capabilities to existing devices
  • Wide applications: ESP-32CAM can be widely applied in various IoT applications; It is suitable for home smart devices, industrial wireless control, wireless monitoring, QR wireless, wireless positioning system signals and other IoT applications; It is an proper solution for IoT applications.
  • HiLetgo ESP32-CAM Camera Module ESP32-S OV2640 2MP Camera Development Board Wireless WiFi Bluetooth with TF Card Slot for Arduino Raspberry Pi

    Category : Camera
    Brand : HiLetgo
    Features
  • ESP32-CAM is a WIFI+ bluetooth dual-mode development board that uses PCB on-board antennas and cores based on ESP32 chips. It can work independently as a minimum system.
  • Ultra-small 802.11b/g/n Wi-Fi + BT/BLE SoC module
  • Low-power dual-core 32-bit CPU for application processors
  • HiLetgo UNO R3 D1 R32 ESP32 ESP-32 CH340G WiFi+Bluetooth+UNO Development Board WiFi Bluetooth 4MB Flash with Micro USB for Arduino

    Category : Personal Computer
    Brand : HiLetgo
    Features
  • DC 5V-12V
  • 1 analog input(3.2V max input)
  • Micro USB connection
  • Compatible with For Arduino
  • D1 R32=WiFi+Bluetooth+UNO
  • Stemedu ESP32-CAM ESP32 Camera Module 2MP Camera Development Board Wireless WiFi Bluetooth Module with HC-SR501 PIR Motion Sensor for Arduino Raspberry Pi

    Category : Personal Computer
    Brand : Stemedu
    Features
  • ESP32-CAM is a WIFI+ bluetooth dual-mode development board that uses PCB on-board antennas and cores based on ESP32 chips. It can work independently as a minimum system.
  • Widely Application: ESP32-CAM can be widely used in various IOT applications. It is suitable for home smart devices, industrial wireless control, wireless monitoring, QR wireless identification, wireless positioning system signals and so on.
  • This ESP32-CAM development module support OV2640 and OV7670 cameras, built-in flash, support TF card, max capacity is 4G.
  • About HC-SR501 PIR motion sensor: This HC-SR501 PIR motion sensor can turn on devices by detected motion. Automatically and quickly open various types of incandescent, fluorescent lamps, buzzer, automatic doors, electric fans, automatic washing machine and dryer Machines and other devices.
  • Please contact us for the tutorials and video, how to email us? Please click ¡°Stemedu¡± (you can find "Sold by Stemedu" under Buy Now button), in the new page, click ¡°Ask a question¡± to email us
  • 2 Pack ESP32-CAM WiFi Bluetooth Camera Module Development Board ESP32 with Camera Module OV2640

    Category : Personal Computer
    Brand : Xiuxin
    Features
  • The ESP32CAM is a tiny module based on ESP32 chip and OV2640. You can even program the ESP32CAM through the ESP-IDF by installing the ESP32 Core
  • The ESP32CAM equips the ESP32 with everything necessary to program, run and develop on the wonderchip. Additionally, the board reserved the MPU6050,BME280 and an analog MIC.
  • ESP integrates WiFi, traditional bluetooth and BLE Beacon, with 2 high-performance 32-bit LX6 CPUs, 7-stage pipeline architecture, main frequency adjustment range 80MHz to 240MHz, on-chip sensor, Hall sensor, temperature sensor, etc.
  • Fully compliant with WiFi 802.11b/g/n/e/i and bluetooth 4.2 standards, it can be used as a master mode to build an independent network controller, or as a slave to other host MCUs to add networking capabilities to existing devices.
  • ESP32-CAM can be widely used in various IoT applications. It is suitable for home smart devices, industrial wireless control, wireless monitoring, QR wireless identification, wireless positioning system signals and other IoT applications. It is an ideal solution for IoT applications.
  • ESP32 LoRa 32 (V2), ESP32 Development Board WIFI Bluetooth LoRa Dual Core 240MHz CP2102 with 0.96inch OLED Display included 868/915MHZ Antenna for Smart Cities, Smart Farms, Smart Home, and IoT Makers

    Category : Personal Computer
    Brand : MakerFocus
    Features
  • ★ Documents: Please get the link from the product description below
  • ★Note: This item comes unassembled, soldering of headers is required. Lithium battery is not included, battery may be purchased here: https://www.amazon.com/dp/B07CXNQ3ZR
  • ★Upgrade ESP32 lora development board with 868/915MHz antenna, it supports Sniffer, Station, softAP and Wi-Fi Direct modes. If you want to use the Lora feature, you need two esp32 lora modules. One is used to send messages and one is used to receive messages
  • ★High reliability, transmission distance (measured open area communication distance 2.8Km); Receiver sensitivity up to - 139 dBm, UDP continues to throughput by 135 Mbps
  • ★Board friendly, space of pins is 2.54*23mm, fit to breadboard. 0.96-inch blue esp32 oled display, lithium battery charging circuit and interface, CP2102 USB to serial chip
  • Aideepen ESP32 Cam WiFi&Bluetooth Camera Module OV2640 2.0MP with 8DBI High Gain Dual-Band Antenna+ 20cm IPEX to RP-SMA Cable

    Category : Personal Computer
    Brand : Aideepen
    Features
  • 【2021 Product upgrade】ESP32-CAM enhanced version ,ESP32 cam WiFi&Bluetooth module+OV2640 2.0MP camera module+8DBI high gain dual-band antenna+ 20cm IPEX to RP-SMA male pigtail cable
  • The wireless communication distance is greatly increased, and the quality of the model is improved
  • Widely Applications: It is suitable for home smart device image transmission, wireless monitoring, smart agriculture, QR wireless recognition, DIY wireless image transmission
  • Image output form: JPEG (only OV2640 support), BMP, GRAYSCALE
  • Please Note: the onboard antenna is not enabled, an external antenna is required
  • DORHEA ESP32-CAM Camera Module WiFi Bluetooth Development Board ESP32 Wireless OV2640 Camera Module + HC-SR501 Pir Motion IR Sensor Body Module Infrared Detector Sensor Module + Jumper Wire - 2Set

    Category : Personal Computer
    Brand : DORHEA
    Features
  • The ESP32 CAM equips the ESP32 with everything necessary to program, run and develop on the wonderchip. Additionally, the board reserved the MPU6050,BME280 and an analog MIC.
  • ESP32-CAM can be widely used in various IoT applications. It is suitable for home smart devices, industrial wireless control, wireless monitoring, QR wireless identification, wireless positioning system signals and other IoT applications. It is an ideal solution for IoT applications.
  • ESP32 CAM supports interfaces such as UART/SPI/I2C/PWM/ADC/DAC.
  • HC-SR501 pir motion IR sensor body module has high sensitivity, high reliability, wide detection angle, long-range and ultra-low-power operating mode.When someone approach human infrared PIR body sensor,output range High,when people leave,output Low.Not repeat/repeatable 2 trigger mode.Sensitivity and Time Delay is adjustable.Sensing Angle <100°.
  • This HC-SR501 pir motion sensor can turn on devices by detected motion. Automatically and quickly open various types of incandescent, fluorescent lamps, buzzer, automatic doors, electric fans, automatic washing machine and dryer Machines and other devices.
  • DORHEA 4 Set ESP32 Cam WiFi Bluetooth Development Board with OV2640 Camera Module + Micro USB to Serial Port CH340C 4.75V-5.25V Nodemcu for Ardu ino Raspberry Pi

    Category : Personal Computer
    Brand : DORHEA
    Features
  • The ESP32 CAM equips the ESP32 with everything necessary to program, run and develop on the wonderchip. Additionally, the board reserved the MPU6050,BME280 and an analog MIC.
  • ESP32-CAM can be widely used in various IoT applications. It is suitable for home smart devices, industrial wireless control, wireless monitoring, QR wireless identification, wireless positioning system signals and other IoT applications. It is an ideal solution for IoT applications.
  • ESP32 CAM supports interfaces such as UART/SPI/I2C/PWM/ADC/DAC, ultra-low power consumption, deep sleep current is as low as 6mA. It is an ultra-small 802.11b/g/n Wi-Fi + BT/BLE SoC module.
  • The esp32 kit module can work independently as the smallest system.
  • Esp32 cam adopts Micro USB interface, convenient and reliable connection method, convenient to apply to various IoT hardware terminal occasions.
  • DORHEA ESP32 Cam WiFi Bluetooth Development Board with OV2640 Camera Module + Micro USB to Serial Port CH340C 4.75V-5.25V Nodemcu for Ardu ino Raspberry Pi - 3 Set

    Category : Personal Computer
    Brand : DORHEA
    Features
  • The ESP32 CAM equips the ESP32 with everything necessary to program, run and develop on the wonderchip. Additionally, the board reserved the MPU6050,BME280 and an analog MIC.
  • ESP32-CAM can be widely used in various IoT applications. It is suitable for home smart devices, industrial wireless control, wireless monitoring, QR wireless identification, wireless positioning system signals and other IoT applications. It is an ideal solution for IoT applications.
  • ESP32 CAM supports interfaces such as UART/SPI/I2C/PWM/ADC/DAC, ultra-low power consumption, deep sleep current is as low as 6mA. It is an ultra-small 802.11b/g/n Wi-Fi + BT/BLE SoC module.
  • The esp32 kit module can work independently as the smallest system.
  • Esp32 cam adopts Micro USB interface, convenient and reliable connection method, convenient to apply to various IoT hardware terminal occasions.
  • HiLetgo 0.96" ESP32 OLED ESP-WROOM-32 ESP32 ESP-32 OLED WiFi Bluetooth Development OLED Display for Arduino AP STA

    Category : BISS
    Brand : HiLetgo
    Features
  • Feature: Integrated antenna and RF Barron
  • Characteristic: 2.4 GHz dual-mode Wi-Fi
  • Characteristic: Bluetooth low power technology
  • Characteristics: Using AP, STA and AP and STA LUA program support
  • Strong points: A wide range of safe, reliable and scalable applications for the TSMC 40nm chips
  • LILYGO TTGO Meshtastic T-Beam V1.1 ESP32 915Mhz WiFi Bluetooth ESP32 GPS NEO-6M SMA 18650 Battery Holder with OLED (915MHZ OLED)

    Category : Personal Computer
    Brand : KENEW

    ACROBOTIC ESP32-CAM Programmer + Development Board w/ OV2640 2MP Camera Module and SD Card for Arduino ESP8266 Raspberry Pi ESP-32 ESP32 CAM ESPCAM

    Category : BISS
    Brand : ACROBOTIC
    Features
  • The simplest way of programming an ESP32-CAM (included) board
  • Onboard CH340 provides necessary USB capabilities for programming the ESP32s for progr
  • Quick installation – plugs into one of your computer's USB ports
  • USB drivers are typically included with the latest version of the Arduino IDE
  • ACROBOTIC ESP32 Development Board w/ OV2640 Camera + 0.91 OLED Camera Board + 3 dBi Antenna Journal TTGO ESP32-CAM

    Category : Personal Computer
    Brand : ACROBOTIC
    Features
  • ESP32-powered camera module with a OV2640 1600×1200 pixel resolution and I2S control onboard
  • Low-power consumption on sleep mode (6mA)
  • Integrated Silicon Labs CP2104 USB to Serial UART adapter
  • Onboard 0.91" OLED screen
  • HiLetgo ESP32 LCD WiFi Kit ESP-32 1.14 Inch LCD Display WiFi+Bluetooth CP2104 USB Type-C Internet Development Board for Arduino ESP8266 NodeMCU

    Category : Personal Computer
    Brand : HiLetgo
    Features
  • Chipset: ESPRESSIF-ESP32 240MHz Xtensa single-/dual-core 32-bit LX6 Microprocessor
  • FLASH: QSPI flash 4MB
  • SRAM: 520 kB SRAM
  • USB to TTL: CP2104
  • USB: Type-C
  • ICQUANZX 3PCS NodeMCU ESP32 ESP-WROOM-32 WLAN WiFi Bluetooth IoT Development Board 5V Compatible for Arduino

    Category : BISS
    Brand : ICQUANZX
    Features
  • Different than ESP8266 V2 and ESP8266 Pro, the ESP32 carries the ESP32-WROOM-32 module while keeping the same form factor.
  • The WeMos ESP32 Pro development board, everything needed to program the latest ESP32 module (the ESP-WROOM-32), ESP32/32S WIFI Development Bluetooth ESP8266 Module CP2104 for Arduino.
  • The WeMos family of boards is one of the latest additions to the ESP32- and ESP8266-based Internet Of Things (IoT) ecosystem.
  • The DOIT esp32 devkit is a single chip solution that combines Bluetooth and 2.4 GHz Wi-Fi capabilities.
  • Together with a growing set of expansion boards (shields), the WeMos family is a great solution for building projects quickly using both the ESP8266 and ESP32 SoC.
  • HiLetgo ESP32 ESP-32 ESP-32S ESP32S WiFi Bluetooth Wireless Board Module Based ESP-WROOM-32 Dual Core Mode CPU

    Category : Personal Computer
    Brand : HiLetgo

    AiTrip 5 Pack ESP32-CAM WiFi + Bluetooth Module Development Board with OV2640 Camera Modulew for Arduino Raspberry Pi

    Category : Personal Computer
    Brand : AITRIP
    Features
  • ESP32-CAM can be widely used in various IoT applications. It is suitable for home smart devices, industrial wireless control, wireless monitoring, QR wireless identification, wireless positioning system signals and other IoT applications. It is an ideal solution for IoT applications.
  • ESP32-CAM is a WIFI+ bluetooth dual-mode development board that uses PCB on-board antennas and cores based on ESP32 chips. It can work independently as a minimum system.
  • Ultra-small 802.11b/g/n Wi-Fi + BT/BLE SoC module
  • Low-power dual-core 32-bit CPU for application processors
  • ESP integrates WiFi, traditional bluetooth and BLE Beacon, with 2 high-performance 32-bit LX6 CPUs, 7-stage pipeline architecture, main frequency adjustment range 80MHz to 240MHz, on-chip sensor, Hall sensor, temperature sensor, etc.
  • Xiuxin ESP32 Development Board 2.4GHz Dual-Mode WiFi Bluetooth Dual Cores ESP32s Antenna Module Board (1 pc)

    Category : Personal Computer
    Brand : Xiuxin
    Features
  • It is 2.4GHz Dual Mode WiFi + Bluetooth Development Board
  • Dual Core ESP-32 Antenna Module
  • Support LWIP protocol, Freertos .
  • SupportThree Modes: AP, STA, and AP+STA
  • HiLetgo ESP32 OLED WiFi Kit ESP-32 0.96 Inch Blue OLED Display WiFi+Bluetooth CP2012 Internet Development Board for Arduino ESP8266 NodeMCU

    Category : Personal Computer
    Brand : HiLetgo
    Features
  • ESP32 WIFI Kit for Arduino ESP8266 NodeMCU
  • Operating voltage: 3.3V to 7V; Supports Sniffer, Station, softAP and Wi-Fi Direct modes
  • KeeYees Development Board 2.4 GHz Dual Core WLAN WiFi + Bluetooth 2-in-1 Microcontroller ESP-WROOM-32 Chip CP2102 for ESP32 for Arduino (2PCS)

    Category : Personal Computer
    Brand : KeeYees
    Features
  • This module is safe, reliable, and scalable to a variety of applications.
  • The module has 38 pins and has more features than a 30-pin module. And smaller in size, more convenient to use.
  • Support Lua program, easy to develop. Support of three modes: AP, STA and AP + STA.
  • This board is used with 2.4 GHz dual-mode Wi-Fi and Bluetooth chips ESP-WROOM-32, as well as the 40nm low-power technology.
  • KeeYees 2 Pack ESP32 Upgrade Mini WiFi + Bluetooth Internet Development Module Expansion Board Chip ESP-WROOM-32 for NodeMCU for Arduino

    Category : Personal Computer
    Brand : KeeYees
    Features
  • ★ ESP-WROOM-32 CHIP ★ ESP32MH-ET LIVE MiniKit supports ESP-WROOM-32 module, onboard WIFI+Bluetooth function, built-in two low-power MCUs. ESP32 mini upgrade module is compatible for Arduino IDE.
  • ★ UPGRADED MODULE ★ The ESP32 mini upgrade module is further upgraded on the basis of the ESP8266 MINI module! The pin arrangement is the same as the ESP8266 MINI module. All expansion modules of ESP8266 MINI can be used with ESP32 MINI modules, and more GPIO pins have been expanded on this basis.
  • ★ CP2104 DRIVER ★ The onboard CP2104 stable to TTL chip ensures the normal communication of the serial port, and supports automatic download, no need to manually switch download and operation modes.
  • ★ SUPPORT MULTIPLE INTERFACES ★ The ESP32 ESP32 mini upgrade module supports most functions such as I2C interface, SPI interface, UART interface, CAN interface, CPU ID access, ADC and DAC channels, and PWM channels.
  • ★ WIDE ADAPTABILITY ★ It is small in size, integrates ESP-WROOM-32 pins in one, has complete functions, has many adaptable expansion boards, and supports development on Windows systems (cygwin and msys32 simulation environments) and Linux systems.
  • MELIFE 0.96" OLED ESP-WROOM-32 for ESP32 Display 2.4GHz WiFi Bluetooth Dual Mode Development Board Display for Arduino Wemos AP STA

    Category : Personal Computer
    Brand : MELIFE
    Features
  • 0.96" OLED Display 2.4GHz Dual Mode WiFi + Bluetooth Development Board, Bluetooth low power technology.
  • Development board based on ESP-WROOM-32.
  • Supporting the LwIP protocol, Integrated antenna and RF Barron.
  • Supporting three modes: AP, STA, and AP+STA LUA program support.
  • Supporting Lua program, Supporting 32Mbit flash, easily to develop.